Linkind Smart WiFi & Bluetooth Light Switch 2-Way Wall Switch
Linkind Smart WiFi Bluetooth Light Switch is standard wall plate size no hub required, easy to set up step by step with a guide on Linkind app.
Create a smart home by replacing your old switch with Linkind smart WiFi light switch. You are able to easily and conveniently control your lights via your smartphone at any time and any place, and enjoy hands-free control in your home with voice command via Amazon Alexa. Customizing schedule, timer, countdown, scenes or grouping will help save your electricity bill and secure your home.
Expand your smart space by combining the smart switch, your light and Linkind motion sensor (need Linkind hub or built-in Zigbee smart home hub).
|2 - 5||3% USD $14.54|
|6 - 15||5% USD $14.24|
|16 - 30||10% USD $13.49|
Create a smart home by replacing your old switch with Linkind smart WiFi light switch. You are able to easily and conveniently control your lights via your smartphone at any time and any place. Customizing schedule, timer, countdown, scenes or grouping will help save your electricity bill and secure your home.
Matters needing attention:
– Neutral wire is required.
– Only support 2.4G network (not 5G).
– For single-pole switch only. Not compatible with 3-way (multi-location control) switches.
– NOT dimmer switch.
– Standard size: compatible with your existing 1-gang/2-gang/3-gang standard wall plates.
– Do not install and replace it privately. It should be installed by professionals.
|Max Load||Incandescent 600W, CFL/LED 300W|
|Protocol||Wi-Fi (2.4GHz only), Bluetooth|
|Range||About 131ft indoor|
|Voice Control||Amazon Alexa|
|Smart Function||Remote control, voice control, countdown, schedule, delay-off, vacation mode|
You can monitor the real-time status of your devices and don’t need to worry whether you leave the lights on when you’re away from home or on vacation. You can also turn on your lights, as usual, making it look like you’re at home so as to trick potential intruders.
It is quite convenient to use simple voice commands to turn on or turn off your lights via Alexa when your hands are full. You can also control the switch via both Linkind app and physical operation.
You can set a countdown to turn on or off the light. Like, setting a five-minute turn-off countdown before going to bed, so you don’t have to turn off the light manually when you are already on the bed while your phone is away from your reach.
With timing function, you can turn on/off lights according to the time you set. Set the porch light to turn on at 19:00 when it gets dark and turn off at 6:00 automatically to save your electricity bill.
Set a delay time on Linkind App. Before going upstare, double-click the “Off” button (interval is less than 500ms) to delay of the lamp.
Without having pre-set schedules, select the vacation mode and the system can simulate your everyday lighting habits, acting like someone is at home, improving home security.
With flammability UL94-V0 approved, prevent lightning, surges and spikes. Pull out the air-gap tab to cut off the power of the lamp before replacing the lamp.
Linkind smart switch replaces any standard light switch. No hub required to connect to the WiFi of your home. It comes with the necessary accessories for the installation. Just follow the clear instruction to complete the wiring and pairing.
1, Turn the power off at the circuit breaker.
2, Remove the existing switch and connect the new switch, check all wires are secure.
3, Mount the switch with the screws and attach the faceplate.
4, Turn power ON at the circuit breaker.
Generally speaking, the neutral wire is colored white. But it may be other colors if the electrical followed a different scheme. If you’re not familiar with basic electrical work, please call a professional electrician to install the switch.
|Dimensions||2.6 × 5 × 2.6 in|